Stock available and shipping
SmartScope
Everything you need to boost the development of your own electronics devices is included in this package:
- the SmartScope with 4M sample buffer dedicated for each channel
- 2 analog probes
- the digital probe cable
- a miniB USB cable to connect to your pc or laptop
The illustrious Wifi bridge
The LabNation wifi bridge is a stand-alone battery-included device which hooks up a SmartScope to your wifi network. This allows you to control the SmartScope from your (standard, non-jailbroken) iPhone or iPad; or simply from any tablet/phone/pc connected to your network.The wifi bridge includes a large 4400mAh battery pack, a wifi antenna, a USB port to connect the SmartScope to and a microB port to recharge its battery.
Manual: http://wiki.lab-nation.com/index.php/Smartscope_WiFi_Bridge
Logic Analyser Cable
The logic analyser cable plugs in to the AUX port of the SmartScope, providing 8 shielded probe pins for each of the digital inputs, as well as the external trigger input. Each digital probe has its own ground connector and embeds a small passive filter close to the header, allowing for digital probing without signal cross-talk on the cable.Click here to see it in action
Android USB-A
Connect your SmartScope to your Android device!
This 10cm cable turns the micro-USB port of your Android device into a regular USB port, to which you can connect the SmartScope using its included USB cable
Additional Analog Probes
Set of 2 analog probes (60MHz)- x1 / x10 switch
- 4 different color tip rings
- probe hook caps
- ground leads
Android mini-USB
Connect the SmartScope directly to your Android device with this 50cm mini-USB to micro-USB-OTG cable. This cable allows you to leave the USB OTG and long mini-USB cables at home.
